Feeder Products

FEEDER PANEL OPEN BOTTOM

• 50 inches in height
• Consists of 1 3/4″ O.D. round tubular steel
• 6 horizontal bars
• The “S” bar is welded between the solid bottom and the 2nd from the top horizontal bar allowing for a 191/2″ vertical opening
• “S” bars reduce hay waste
• Horizontal location of “S” bars can be altered upon request
• Drop-in Pin system provides quick and easy installation
• Available in lengths from 4′ to 16′ in 2′ intervals
• Available in Green or Red
• Made on order only

FEEDER PANEL CLOSED BOTTOM

• 50 inches in height
• Consists of 1 3/4″ O.D. round tubular steel
• 6 horizontal bars
• The solid bottom is reinforced by 4 horizontal bars and 7 gauge flat braces
• height is 18 3/4″, also available in open bottom
• The “S” bar is welded between the solid bottom and the 2nd from the top horizontal bar allowing for a 191/2″ vertical opening
• The solid bottom and “S” bars reduce hay waste
• Horizontal location of “S” bars can be altered upon request
• Drop-in Pin system provides quick and easy installation
• Available in lengths from 4′ to 16′ in 2′ intervals
• Available in Green or Red
• Made on order only

CALF PASS THROUGH PANEL

• 62 inches in height
• Consist of 1 3/4″ O.D. round tubular steel
• 4 horizontal bars
• Horizontal bars are mechanically adjustable; allows only calves to pass through
• Custom vertical bars to meet specific needs
• The number of separation bars vary according to the length of the panel
• Attaches to corral panels
• Drop-In Pin System
• Heavy Duty series
• Available in lengths from 4′ to 16′ in 2′ intervals
• Available in Green or Red
• Made on order only

BUNK FEEDERS

10 FT Bunk Feeders
• 20 inches in height
• Consist of 1 3/4″ O.D. round tubular steel
• 34 1/4 inches in width
• Base runners are 90 inches in length
• Four support members under line for extra stability
• All feeders have drain holes
• Feeders are available painted or galvanized

Liner
• Depth 11 1/4 inches
• Inside length 114 inches
• Inside width 22 1/2 inches

5 FT Bunk Feeders
• 20 inches in height
• Consist of 1 3/4″ O.D. round tubular steel
• 34 1/4 inches in width
• Base runners are 45 inches in length
• Three support members under line for extra stability
• All feeders have drain holes
• Feeders are available painted only

Liner
• Depth 11 1/4 inches
• Inside length 57 inches
• Inside width 22 1/2 inches

Three Hole Mineral Feeder