Gates

SUPER DUTY ALL 14 GAUGE GATE

  • 50 inches in height
  • Consist of 1 3/4″ O.D. round tubular steel
  • 7 horizontal bars- Horizontal bars are placed through the brace before welding
  • Braces are made by using flat steel, then punching holes through the steel, folding the edges, and adding two additional bends to provide stability, strength, and completion of the Z formation
  • Corners are rounded
  • Hinges: Top is adjustable; Bottom hinge is welded in place to help prevent twisting and turning
  • 3/4″ x 12″ threaded rod hanger
  • Heavy-Duty Chain and latch
  • Available in lengths from 4′ to 20′ in 2′ intervals
  • Available in Green or Red
  • Made on order only

SUPER DUTY 2″

  • 51″ inches in height
  • Consist of 2″ O.D. round tubular steel
  • 6 horizontal bars- Horizontal bars are placed through the brace before welding
  • Braces are made by using flat steel, then punching holes through the steel, folding the edges, and adding two additional bends to provide stability, strength, and completion of the Z formation
  • Corners are rounded
  • Hinges: Top is adjustable; Bottom hinge is welded in place to help prevent twisting and turning
  • 3/4″ x 12″ threaded rod hanger
  • Heavy-Duty Chain and latch
  • Available in lengths from 4′ to 20′ in 2′ intervals
  • Available in Green
  • Available in Red (order only)

SUPER DUTY 2″ GALVANIZED GATE

  • 51″ inches in height
  • Consist of 2″ Galvanized O.D. round tubular steel
  • 6 horizontal bars- Horizontal bars are placed through the brace before welding
  • Braces are made by using flat steel, then punching holes through the steel, folding the edges, and adding two additional bends to provide stability, strength, and completion of the Z formation
  • Corners are rounded
  • Hinges: Top is adjustable; Bottom hinge is welded in place to help prevent twisting and turning
  • 3/4″ x 12″ threaded rod hanger
  • Heavy-Duty Chain and latch
  • Available in lengths from 4′ to 20′ in 2′ intervals

HEAVY GATE

  • 50 inches in height
  • Consist of 1 3/4″ O.D. round tubular steel
  • 7 horizontal bars- Horizontal bars are placed through the brace before welding
  • Braces are made by using flat steel, then punching holes through the steel, folding the edges, and adding two additional bends to provide stability, strength, and completion of the Z formation
  • Corners are rounded
  • Hinges: Top is adjustable; Bottom hinge is welded in place to help prevent twisting and turning
  • 3/4″ x 12″ threaded rod hanger
  • Heavy-Duty Chain and latch
  • Available in lengths from 4′ to 20′ in 2′ intervals
  • Available in Green
  • Available in Red (order only)

REGULAR GATE

  • 50 inches in height
  • Consist of 1 3/4″ O.D. round tubular steel
  • 7 horizontal bars- Horizontal bars are placed through the brace before welding
  • Braces are made by using flat steel, then punching holes through the steel, folding the edges, and adding two additional bends to provide stability, strength, and completion of the Z formation
  • Corners are rounded
  • Hinges: Top is adjustable; Bottom hinge is welded in place to help prevent twisting and turning
  • 5/8″ x 13″ threaded rod hanger
  • Heavy-Duty Chain and latch
  • Available in lengths from 4′ to 20′ in 2′ intervals
  • Available in Green or Red

STANDARD 7 BAR GATE

  • 50 inches in height
  • Consist of 1 3/4″ O.D. round tubular steel
  • 7 horizontal bars- Horizontal bars are placed through the brace before welding
  • Braces are made by using flat steel, then punching holes through the steel, folding the edges, and adding two additional bends to provide stability, strength, and completion of the Z formation
  • Corners are rounded
  • Hinges: Top is adjustable; Bottom hinge is welded in place to help prevent twisting and turning
  • 5/8″ x 13″ threaded rod hanger
  • Heavy-Duty Chain and latch
  • Available in lengths from 4′ to 20′ in 2′ intervals
  • Available in Green
  • Available in Red (order only)

STANDARD 6 BAR GATE

  • 50 inches in height
  • Consist of 1 3/4″ O.D. round tubular steel
  • 6 horizontal bars- Horizontal bars are placed through the brace before welding
  • Braces are made by using flat steel, then punching holes through the steel, folding the edges, and adding two additional bends to provide stability, strength, and completion of the Z formation
  • Corners are rounded
  • Hinges: Top is adjustable; Bottom hinge is welded in place to help prevent twisting and turning
  • Plated 6″ screw in lag pin that screws into the wood
  • Welded Heavy-Duty Chain and latch in place
  • Available in lengths from 4′ to 16′ in 2′ intervals
  • Available in Green and Red
  • Made on order only

HOG GATES

  • 38 inches in height
  • Consists of 1 3/4″ O.D. round tubular steel
  • 7 horizontal bars- Horizontal bars are placed through the brace before welding
  • Braces are made by using flat steel, then punching holes through the steel, and adding two additional bends to provide stability, strength, and completion of the Z formation
  • Threaded Rod hanger
  • Heavy duty chain and latch
  • Available in lengths from 4′ to 20′ in 2′ intervals
  • Available in weights of Standard, Regular, Heavy, and Super Duty All 14 Gauge
  • Available in Green or Red
  • Ideal for swine and miniature animals
  • Made on order only

WIRE MESH GATES

  • 50 inches in height
  • Consist of 1 3/4″ O.D. round tubular steel
  • 3 horizontal bars
  • Formed tubular steel braces
  • Wire Mesh – 34 1/2 inches in height
  • Corners are rounded
  • Hinges: Top is adjustable; Bottom hinge is welded in place to help prevent twisting and turning
  • 6″ screw in lag pin that screws into the wood
  • Heavy-Duty Chain and latch
  • Available in lengths from 4′ to 16′ in 2′ intervals
  • Available in Green or Red
  • Made on order only